DEMOLITION STEEL & DRILL BITS 58 1-1/8" Hex Makita® Large 3/4" Hex SDS-MAX Spline or 3/4" Hex - 21/32" Round Makita® Small SDS-PLUS Size Part # Size Part # Size Part # Size Part # Size Part # Size Part # Size Part # Bull Point All-purpose demolition and starting holes in concrete 20-1/2" D-21353 Also fits air tools 16" 798029-5 12" 18" 751421-A 751422-A 12" 12" 18" 18" 751423-A D-36463 751424-A D-36479 12" 18" D-20074 D-19196 8-3/4" B-06921 10" D-51144 16" B-45559 Self-Sharpening Flat Chisel General purpose chipping, edging, and channeling 1-1/8" x 20-1/2" D-21369 Also fits air tools 1-3/8" x 16" A-80597 1" x 12" 1" x 18" 751224-A 751225-A 1" x 12" 1" x 12" 1" x 18" 1" x 18" 751228-A D-36485 751231-A D-36491 1" x 12" 1" x 18" D-20080 D-19205 3/4" x 10" D-51150 Scaling Chisel Wide chisel with two cutting angles for chipping dried concrete 3" x 20-1/2" D-21347 Also fits air tools 4" x 12" D-23868 3" x 12" 751226-A 1-1/2" x 12" 2" x 12" 2" x 12" 3" x 12" 3" x 12" 751235-A 751229-A D-36516 751230-A D-36522 2" x 12" 3" x 12" D-51172 751233-A 1-3/16" x 6" 2" x 6" 2" x 9" B-07331 B-07347 B-07010 2" x 8-1/2" D-51166 Superkut Chisel Long-lasting chisel provides faster penetration and requires less resharpening 1-1/2" x 20-1/2" 751222-A Scraping Chisel Scrapes and chisels with 45° cutting angle 2" x 12" 751227-A 2" x 12" 751232-A 2" x 12" 751234-A Floor Scraper General scraping and clean-up of tile, linoleum floor 6" Floor Scraper 6" Blade & Hardware T-02593 T-02602 4" Blade & Assembly 4" Blade Only A-68161 343411-9 4" Blade & Assembly 4" Blade Only A-68155 343411-9 One-Piece Bushing Tool Removes excess concrete and roughens surface 1-3/4" x 14-3/4" 751717-A 1-3/4" x 9-3/4" 751714-A 1-3/4" x 10" 751715-A 1-3/4" x 10" 798144-5 Asphalt Cutter Cuts asphalt or hard ground (not for concrete) 5" x 17-1/2" 751620-A 5" x 15" 751624-A 5" x 15" 751625-A Digging Chisel Digs deep into hard ground and asphalt 3" x 22-1/2" 751621-A Clay Spade Digs clay, shale, hard-packed gravel, and dirt 5-1/2" x 20" 751622-A 4-1/2" x 17" 751623-A 4-1/2" x 17" 751626-A 4-1/2" x 17" 798148-7 Pointed Spade Breaks clay, dirt, and hard ground quickly 4-3/4" x 19" B-10300 4-1/2" x 16" 751107-A Ground Rod Driver Drives ground rods into the ground 1" I.D. x 2-1/4" x 16" 751102-A 3/4" x 2-3/4" x 10" A-51057 3/4" I.D. x 2-3/4" x 10" 751105-A 3/4" I.D. x 2-3/4" x 10" 751108-A 3/4" I.D. x 2-3/4" x 10" 751109-A 13/16" Ground Rod Driver 798132-2 Spike/Pin Driver Drives spikes, anchoring pins, tent stakes, and more 1-3/4" I.D. x 14-1/2" 751101-A Tamper Shank Tamps asphalt and compacts dirt (use with corresponding plate) 15-1/2" 751103-A Tamper Plate Tamps asphalt and compacts dirt (use with tamper shank) 6" x 6" Square 8" x 8" Square 751710-A 751711-A 7-7/8" Round (Shank & Plate) A-31485 Improved geometry for faster penetration and more efficient breaking 16" Self-Sharpening Bull Point, 1-1/8" Hex (B-45559) Engineered to Self-Sharpen for Continuous Breaking STAYS SHARPER LONGER Self-sharpening design keeps the point sharp longer than traditional bits SELF-SHARPENING BULL POINT DEMOLITION & ROTARY HAMMER STEEL HAMMER GREASE Description Part # Hammer Grease, 100ml • For use with all brands and types of bits for rotary and demolition hammers 194683-7 Hammer Grease, 1 oz. • Use with all Makita Rotary and Demolition Hammerss A-90582
RkJQdWJsaXNoZXIy MjgxNzUw